Symbol-technologies Spectrum24 AP-4131 Manual de usuario descargar pdf (Pagina 141)

Configuring the AP

AP-4131 Access Point Product Reference Guide 131

Ensure the Filename is AP_CFG.TXT unless the user changed the Filename.

Verify the paths accuracy for the filename. See step one.

8. Enter the TFTP Server IP address or name in the TFTP Server field.

9. Press F1 to save settings.

10. The Firmware Update Menu displays Are You Sure? yes no Typ e Y.

If using telnet to connect to the AP through an Ethernet interface, do not use

the

Use XMODEM to Update Access Point’s Firmware option. This option causes the AP to

reset and look for the configuration file over the serial interface.

11. Under the function heading Use TFTP to Update Access Point’s: select Config.

12. Press ENTER.

13. The Firmware Update Menu displays Are You Sure? yes no Typ e Y.

The Telnet session ends when the user answers Y at the prompt.

The WIRED LAN ACTIVITY indicator on the AP does NOT flash.

To view the file transfer log, switch to the TFTP application.

The AP resets when the file transfer completes.

14. Telnet to the AP using its IP address.

1 2 ... 136 137 138 139 140 141 142 143 144 145 146 ... 249 250

Sin comentarios

Symbol-technologies Spectrum24 AP-4131 Manual de usuario Pagina 141